How to Prepare Your HVAC & Plumbing for Volcanic Ash

  • Mount Spurr in Alaska

Volcanic ash from Mt. Spurr could reach Anchorage fast. It’s important to act early to protect your home’s HVAC and plumbing systems. Ash is not like regular dust. It’s made of tiny, sharp particles of rock and glass that can damage your heating, ventilation, and water systems.

Why Volcanic Ash is a Threat to HVAC and Plumbing

  • Clogs Air Filters Fast: Volcanic ash fills up filters quickly, stopping airflow and making your system work harder—or even shut down.
  • Damages Outdoor HVAC Units: Ash can block airflow around outdoor systems, leading to overheating and damage.
  • Fills Ducts with Fine Dust: Once inside your ductwork, ash can lower your home air quality and spread throughout your house.
  • Blocks Vents and Pipes: Ash can clog vents and flues, causing dangerous backdrafts, carbon monoxide build up, or system failures.
  • Wears Down Moving Parts: The sharp ash particles act like sandpaper inside fans and motors.

What You Can Do to Prepare

1. Check and Replace Your Filters Early

Install new filters now. After the eruption, you’ll need to check and change them frequently, so make sure you know how to change them and have plenty of them on hand.

2. Cover Outdoor Units Safely

Use a manufacturer approved cover before ashfall. Never run the system while covered, unless the manufacturer’s covers are approved for use when the unit is running. 

3. Add Filters To Intake Vents

If your system pulls air from outside, you can put a furnace filter, or other mesh, like pantyhose, over the intake vents during ashfall to prevent ash from getting inside your heating units. Check the intake vents regularly, during and after ash fall, to make sure the filter or mesh does not get clogged. 

4. Install or Check CO Detectors

Ash can block vents, which could cause dangerous gas buildup. Make sure your carbon monoxide detectors are working.

5. Schedule a Pre-Eruption System Check

Mountain Mechanical can inspect your HVAC and plumbing to ensure everything is working properly before the eruption.

It is best, if you are able, to turn off your furnaces, boilers, water heaters, and any other heating units that draw air in from outside the home, when ash is actively falling, but our current temperatures may make that impossible. So, follow the above tips to help protect your heating systems from damage during any volcanic eruptions. 

Plumbing Prep Tips

Clear Outdoor Drains and Vents: Prevent buildup and flooding.

Check Boiler/Furnace Vents: These can get blocked and cause system failure.

Make Sure Water Heaters Are Venting Properly: Ensure you receive water heater inspections and repairs if needed. This is key to safe operation.

How Mountain Mechanical Can Help You Prepare

We’re ready to help you get your home ready for volcanic ash:

  • Pre-eruption HVAC inspections
  • Filter upgrades and replacements
  • Vent and intake sealing
  • Bathroom and kitchen plumbing checks

Call Mountain Mechanical today at (907) 344-0700.

We’re Always On Call – especially when Alaska needs us most.